Notice TRENDNET TPL-401E2K - QUICK INSTALLATION GUIDE

TRENDNET

Notice

---

TRENDNET TPL-401E2K

© copyright TRENDNET

Télécharger la notice

Extrait du mode d'emploi TRENDNET TPL-401E2K

Les instructions détaillées pour l'utilisation figurent dans le Guide de l'utilisateur.

Plug a TPL-401E into an available power outlet. This TPL-401E should be located within the reach of the router's network cable. Outlet 2. Connect a network cable from the TPL-401E to an available LAN network port on your router (e. TEW-673GRU). Plug a second TPL-401E into an available power outlet where your remote computer or network appliances (e. Game Console, IP Set box, network enabled TV, etc. ) are located. Outlet 8 4. Connect a network cable from the TPL-401E network port into the network port on your remote computer or network appliance (e. Game Console, Blu-ray player, IP Set box, network enabled TV, etc. Outlet 5. Verify that the PWR (Power), PL (Powerline) and ETH (Ethernet Link/ACT) LEDs are on for both TPL-401E adapters. Your installation is now complete For detailed information regarding the the TPL-401E/TPL-401E2K, configuration and advanced settings, please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's website at http://www. trendnet. Register Your Product To ensure the highest level of customer service and support, please take a moment to register your product Online at: www. trendnet. com/register Thank you for choosing TRENDnet 9 3. LEDs and Buttons PWR (Power) ETH (Ethernet Link/ACT) PL (Powerline) The Gigabit Ethernet/Network Port and Reset buttton are located at the bottom of the device. Gigabit + Ethernet / Network Port Reset Button Sync Note: Please refer to the User's Guide on the TPL-401E/TPL-401E2K's User's Guide CD for detailed explanations of each LED and button. 10 Dépannage 1. J'ai vérifié si mon périphérique Powerline était branché à mon poste de travail, mais je n'arrive pas à détecter d'autres périphériques Powerline. Que faire ? 1. Vérifiez que vous utilisez les câbles de réseau Ethernet Cat. 5 Cat 5e ou Cat. 6 sur chaque adaptateur TPL-401E. Vérifiez que la prise de courant à laquelle le TPL-401E est branchée se trouve sur le même réseau de istribution électrique et/ou disjoncteur. Si vous n'êtes toujours pas en mesure d'établir la connectivité après avoir effectué les étapes ci-dessus, veuillez réinitialiser les deux adaptateurs TPL-401E aux interfaces par défaut de l'usine. Le nom du réseau par défaut / clé est "HomePlugAV ®". Le bouton Reset est situé sur le bas de la TPL-401E. [...] The TPL-401E2K already includes two TPL-401E adapters) Software Utility Requirements Supported Operating Systems Windows 7 (32/64-bit) Windows Vista (32/64-bit) Windows XP (32/64-bit) CPU 1GHz or above 800MHz or above 300MHz or above Memory 1GB RAM or above 512MB RAM or above 256MB RAM or above Note: The configuration utility will allow you to add security to your powerline network by providing you with the ability to change the default network name and create your own personal network name for your powerline network. The utility can also help you to troubleshoot connectivity between powerline adapters by verifying the network name. Please refer to the User's Guide on the TPL-401E/TPL-401E2K CD-ROM for instructions on installing and using the utility. 6 2. How to Install Powerline Networking Solution 500Mbps Powerline AV Adapter Kit (TPL-401E) Internet Gigabit Powerline The example diagram shows a typical powerline network configuration in a home environment with 3 powerline adapters installed in different rooms. The orange line represents the powerline connectivity established through your home's electrical system and the blue lines represent Cat. 5, 5e, 6 Ethernet connectivity to your network enabled appliances such as a computer, router, or IP set top box connected to your television. Note: 1. DO NOT install the TPL-401E until instructed to do so. DO NOT plug the TPL-401E into a surge protector or power strip. Avoid connecting the TPL-401E into an outlet that has appliances (e. refrigerators, washer and dryer) plugged in. In order for the TPL-401E adapters to link to each other, each unit must be on the same electrical system. A maximum of 16 TPL-401E adapters can be networked. Assuming that the TPL-401E adapters are configured with the default settings, to create a powerline network, simply connect all TPL-401E adapters to wall outlets that are on the same electrical system. No additional configuration in the utility is necessary. The network name must be the same on all powerline adapters in order to establish connectivity. If the network name is not the same on all powerline adapters, the adapters will NOT establish connectivity. [...]..

Téléchargez votre notice ! Téléchargement gratuit et sans inscription de tous types de documents pour mieux utiliser votre cpl TRENDNET TPL-401E2K : mode d'emploi, notice d'utilisation, manuel d'instruction. Cette notice a été ajoutée le Mardi 11 Novembre 2010.

Vous pouvez télécharger les notices suivantes connexes à ce produit :

   TRENDNET TPL-401E2K DATASHEET (517 ko)
   TRENDNET TPL-401E2K (2260 ko)