Notice LINKSYS LAPAC1750PRO X2

LINKSYS

Notice

---

LINKSYS LAPAC1750PRO X2

© copyright LINKSYS

Télécharger la notice

Extrait du mode d'emploi LINKSYS LAPAC1750PRO X2

Les instructions détaillées pour l'utilisation figurent dans le Guide de l'utilisateur.

m the Manage Firmware page, you can: • View the current firmware version for the primary and secondary image • • Switch the firmware image running on the AP. Enter a name (1 to 256 characters) for the image file in the Image Filename field, including the path to the directory that contains the image to upload. If the primary image fails to load, then the secondary image is used to boot the AP. €¢â€¢ •• Wireless packet capture operates in two modes: Capture file mode Remote capture mode For capture file mode, captured packets are stored in a file on the access point. Due to performance and security issues, the packet capture mode is not saved in NVRAM on the AP; if the AP resets, the capture mode is disabled and then you must re-enable it in order to resume capturing traffic. [...] inal WPA. This security mode is backwards-compatible with wireless clients that support the original WPA. In the point-to-point mode, the AP accepts client associations and communicates with wireless clients and other repeaters. In this mode, the central AP accepts client associations and communicates with the clients and other repeaters. When Workgroup Bridge mode is enabled, then the access point supports only one BSS for wireless clients that associate with it, and another BSS to which the access point associates as a wireless client. In Workgroup Bridge mode, the BSS managed by the access point while operating in access point mode is referred to as the access point interface, and associated STAs as downstream STAs. Use the WorkGroup Bridge page to configure the Work Group Bridge mode on the AP and to configure the settings that allow the AP to serve as a bridge between remote clients and the wireless LAN. Choices are: •• •• •• •• Security MAC Select one of the following options for MAC authentication: Authentication •• Disabled—The set of clients in the APs BSS that can Type access the upstream network is not restricted to the clients specified in a MAC address list. €¢â€¢ None Static WEP WPA Personal WPA Enterprise •• Local—The set of clients in the AP’s BSS that can access the upstream network is restricted to the clients specified in a locally defined MAC address list. RADIUS—The set of clients in the AP’s BSS that can access the upstream network is restricted to the clients specified in a MAC address list on a RADIUS server. Station EDCA Parameters Queue Queues are defined for different types of data transmitted from station-to-AP: •• Data 0 (Voice) — Highest priority queue, minimum delay. If the first font is not available on the client system, the next font will be used, and so on. 96 LAPAC1750PRO Access Point Software User Manual Table 60: Captive Portal Upload Custom Images Field Upload Web Customization Image Delete Web Customization Image Description To select an image to upload to the AP for use in the CP authentication page, click Browse and browse to the image to upload. after you select the appropriate image , click Upload. To remove an image that has been uploaded, select the name of the image from the available menu and click Delete. Firmware Use this page to select the firmware image that the AP loads when it boots and to upload a new firmware image to the device. Fro [...]..

Téléchargez votre notice ! Téléchargement gratuit et sans inscription de tous types de documents pour mieux utiliser votre point d'accès wifi LINKSYS LAPAC1750PRO X2 : mode d'emploi, notice d'utilisation, manuel d'instruction. Cette notice a été ajoutée le Lundi 1 Janvier 2017.